How To Use Skyui With Skyrim Special Edition

1. Skyui 2.2 Skyrim Special Edition

It has been an odyssey. My most recent Skyrim save is three years old. I cannot in good conscience pretend to recall what my motivations were the last time I played it – what quests I cared about, what guild or weapon or house I was pursuing. But, for reasons that are part bloody-mindedness and part wincing at the prospect of having to redo so much armour crafting from the start, I have been absolutely determined to get my old saves and characters working in last week’s.It has been a long and tiresome job, but I have achieved it. Here’s how you can do it too.As, the Skyrim Special Edition will load up Skyrim saves, via the simple act of copying the files from My Documents - My Games - Skyrim - Saves to My Documents - My Games - Skyrim Special Edition - Saves.However, if you ran Skyrim with mods, there is a very strong likelihood that the saves will not work.

Skyui 2.2 Skyrim Special Edition

Some folk have been lucky and gotten away with nothing more than a missing content warning message, but others have been completely locked out, usually in the form of a crash to desktop when Skyrim Special Edition tries to load the save.In time, more mods will be rejiggered to work 100% comfortably with the Special Edition, and that will, in theory, iron out quite a few of the savegame incompatibilities – although it may be some time before popular mod loader SKSE gets ported, and the creators of the damn-near essential user interface mod SkyUI no current plans to adapt it. (However, third party attempts have got some of its features working already, so there is hope yet).In the meantime, it’s a lottery as to whether your saves will work. The good news is, there is a fix. The bad news is that it took me bloody ages to get it working, but the extra good news is that, by telling you what I did, you should be able to achieve it far more quickly.It turned out that I had two separate problems. One was a heavy reliance on SKSE-based mods, which by and large are far more problematic for Skyrim SE than ones simply loaded directly by the game. The second was uGrids.

Change Skyrim Special Edition uGridsI’m going to cover uGrids first, because it might well be the only issue you face, and will spare you from the more complicated savegame editing I had to do.If you ever fiddled with uGrids in Skyrim you surely know what they are already, but I’ll summarise quickly in case you blindly used some tool to do it for you without fully understanding what was happening.“ uGridsToLoad” is a line that can be added to the Skyrim.ini file, and which governs how much of Skyrim’s world is loaded into memory and therefore visible at any one time. Many of us whacked the number up from its default 5 to 7, 9 or even 11, in order to avoid distant scenery pop-in as we walked around, and lend a great sense of detail to Skyrim’s then-sumptuous environments.

Oct 28, 2016  Is there an Skse and SkyUi for the Skyrim Special Edition? Skse and SkyUi for Special Edition? Of whats going on and it could show them what they need to do properly convert their mods and upgrade upon them the special edition on release i had mixed feeling since i play modded tf original so going back to as close as vanilla as. Probably gonna be a week or two. Yeah yeah sure 1 week they can do it, litrally take into account how long it took them to get it as refined as it is now if i put a clock on a stable build skse64 with all the features it currently has and mods to start rolling out i would give it 6 months for us to start building a graphicly better heavly modded Skyrim SE still the creation kit comes out for. SkyUI on Skyrim Special Edition? - posted in Skyrim Mod Troubleshooting: Hi, I recently bought the Skyrim Special Edition, re-install nexus mod manager (yeah, its been a while since I played) and I wanted to install the SkyUI mod that is so pleasant. But I couldnt, because nexus mod manager is not set up to work with skyrim. Of course, because its no longer installed on my computer, since I.

Article # 2 in a 10-part series. 1 -. 2 -this article. 3 -.

4 -. 5 -. 6 -. 7 -. 8 -. 9 -. 10 -This article assumes the reader has basic knowledge of mod creation.

Beginners should consider trying some first. For step-by-step examples, see and.When transferring existing plugins from Skyrim 2011 to Skyrim Special Edition (SE), there are a few important changes to consider. Many mods should convert without too much effort, but be aware that some mods may require extra editing. Mods depending on SKSE or SkyUI require advanced skills, and mods with dirty edits or other issues may need special attention. Mod author, Arthmoor,:. Animation files (.hkx) need updating using tool included with SSE Creation Kit (CK). BSA files need repacking using the archive tool included with CK.

Some meshes (.nif files) may need updating. Textures using.dds should work. Targa.tga-files will not work.

Normal maps may need to be updated using DXT5 compression. Plugin ESP files should be checked and updated by loading and saving in SSE CK.Creation Kit may be obtained at by using their manager. Install CreationKit to your Skyrim Special Edition folder. If a plugin has multiple masters, don’t forget to edit CreationKit.ini under General section: 'CreationKit.ini General'. BAllowMultipleMasterLoads = 1Player’s notesIf an author has long since disappeared, players may convert mods for personal use. Stick to simpler mods and realize some conversions may require practiced editing skills. Watch out for plugins that edit waterflow, NPCs, or lighting.

You may want to use check-for-errors feature first. Even though some errors or dirty edits may be fine in 2011 Skyrim, these errors may break or cause other issues in Skyrim SE. Best to let original author fix these issues.Please do not distribute mods without author’s consent.BSA repackOld archive files are not compatible with SE.

If the plugin includes an archived BSA-file, it must be packed with the new archive tool included with CK. Extract the contents of the old BSA using into an empty folder. Load the existing BSA, select all contents, choose use folder button, and unpack. Check for meshes, FaceGen data, or animation files that may need updating (see below).The new CK archive tool, archive.exe, is found in Skyrim Special EditionToolsArchive folder. If your loose files are located somewhere other than in “Data” folder, change the Root Dir to where your files are located. Load the extracted contents folder using Edit-Add Directory and make sure everything has a checkmark (Edit-Check All).

Check compression if you’d like. Choose File-Save As to archive and use the same name. Verify folder structure of archived file using.screen shot above is from a different BSA browserClean up loose files and test in game.Check and update meshesupdate: for the easy way, use instead of the following.Use to check for problems and to update meshes.

There are alternative methods available to scan and fix meshes.Drop Nifscan.exe into the folder with meshes (scans all.nif-files in folder and sub-folders), and use Command Prompt to run Nifscan.Nifscan notes any files that may have issue in SE, such as “contains strips unsupported by SSE” after the filename. The primary incompatibility is the existence of skin-strips which need to be converted into triangles.For step-by-step instruction with video tutorial, seeConvert animation.hkx filesThe SSE CK comes with a tool, HavokBehaviorPostProcess found in Skyrim Special EditionToolsHavokBehaviorPostProcess which includes a readme.txt explaining the method and a sample batch file. Go nuts.FaceGenDataLoad original ESP-file into CK 64-bit and save. Updated FaceGenData will be saved in the normal folder locations:. meshescharacterfacegendatafacegeom plugin-name. texturescharacterFaceGenDataFaceTint plugin-nameRepack these files into BSA keeping the same directory structure then delete the generated folders.Warning: Customized face geometry, such as those modeled or exported from, may be lost. Instead you may prefer to delete this generated data and use original data with SE nif optimization.Check normal, specular mapsYou’ll quickly realize if the map is in unsupported format when the game crashes (CTD).

Some body and face mods may cause a crash in racemenu during character creation. Save original maps using the DXT5 format. Players may consider removing these textures or find a compatible mod.Update plugin.espLoad the plugin created using old CK into new SSE CK including Update.esm as a master, and save. CK will automatically update specific requirements. If plugin includes NPCs or creatures, check for new generated FaceGenData to repack as noted above.

Plugin authors may want to check for any surprises using. Be aware that some edited features may require manual updating.Reminder: If CK generates new FaceGen data, and you don’t want it, remove the generated data folder as noted above.Some warnings on loading a plugin is normal, but pay attention to plugin-specific warnings or warnings when saving. Also, try xEdit check-for-errors feature. Some of these errors may be fine in 32-bit Skyrim, but may break or cause odd side-effects in SE that will need to be fixed.All form versions are supported and safe to use, been so since Fallout 3 back in 2008 when they added it.Resaving plugins in CK before release is a good modding practice to fix whatever issues the official editor won’t like just in case.— zilav, author of xEdit and NifSkope,For players - is the converted mod safe?Mod plugins (esp or esm) copied over from old Skyrim and not properly converted to SE may possibly lead to save-file corruption or other problems. If the conversion was done by the original author, or a reputable author, it’s a good bet the converted mod is safe.

Modding a game is risky business. Read the description carefully and check the comments or bug reports.File header: Form Version ID by itself says nothing about proper conversion.Dirty Weasel Media has posted which reveals methods to check Form Version ID in the header. The new CK for Skyrim Special Edition saves with Form Version ID 44 in the header, and CK for origial Skyrim uses 43. Use to view the Form Version within the File Header.If finding Form Version ID = 43, the plugin could be fine, but you may follow directions under update plugin.esp above if the author isn’t around to convert it. Note that some plugins may require extra tools and advanced skills to properly convert for SE. Form Version ID = 44 by itself does not mean properly converted.Dirty Weasel Media notes in video: “these methods will only show that.esp/.esm was created in the SSE CK, not that it was done correctly.”Authors know best about their plugin compatibility, so try not to bug them if their Form Version ID = 43 unless you show evidence of save corruption or other problems.

Update:Rumors of form version causing save corruption continue to swirl around Nexus, some of them referencing the video mentioned above. Comprehension failure, I suppose.Be aware that this form version in the header is only an indicator of what software saved the file, and has no impact on your game.

A plugin with Form Version of 43 in the header by itself will not cause save-game corruption. This is mentioned in Dirty Weasel Media’s video, and you’ll find the author following up in the comments: “An older Form Version in itself does not cause the save corruption.”SSE supports all form versions up to 44, older ones DO NOT corrupt saves. Badly made mods and conflicts do but this is not related to SSE in any way and form versions particulary— zilav, author of xEdit and NifSkope.